Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

08.06.2025 12:59

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

so, what happens?

Here is a simplified AC power diagram.

But it can get overloaded, and no longer works.

Hubble Trouble Solved? Webb Telescope Finally Cracks the Universe’s Growth Mystery - SciTechDaily

So, the voltage could go up to 500 volts, and the fuse will not open up.

This is where the MOV conducts again, and dissipated the energy.

Now when you have a certain ac resistance, then a current flows in a loop.

India to Open Flagship EV Making Policy to Lure Global Giants - Bloomberg

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

[image of Common-mode choke]

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

My Girlfriend Had a Legendary Sex Life Before Me. No One Will Let Me Forget It. - Slate Magazine

It also is a device that limits the change in current flow.

I post the exact comment here.

2024–10–14 [Omar Gharbi Omar Gharbi ]

What are the pros and cons of a prospective bride/groom not having any siblings?

what exactly is a ‘surge’ protector?

One is “what exactly is in a ‘surge protector’ ? ”

Because the load is inductive, the current lags the voltage.(by a bit).

Why all the fuss about Trump’s policy initiatives? Isn’t he just trying to set a moral tone for the Republican Party to make America great again?

But… the neutral is now “floating” because of the 1 ohm resistance.

This is where this question deviates from being a 'generic' question, and becomes more specific.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

George E. Smith, Nobel laureate who envisioned digital imagery, dies at 95 - The Washington Post

He then describes Rainy Season and Lightning.

but I think this circuit , shows a few more pieces.

eight

What do you typically do while on meth?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

There are three different concepts here that are getting confused.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Earth’s Magnetic Field Failed 41,000 Years Ago – The Catastrophic Event That Altered Human Evolution Forever - Indian Defence Review

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

(Dc diagram shown, AC is similar).

These devices are installed between the “hot” and “neutral” and protective ground.

How did you cope when someone you love, dealing with hyper-independence and trauma, felt they needed space to heal alone? Were you able to support them without overstepping, and did you eventually reconnect? How did that journey unfold?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

but this device (an Inductor) … impedes the rapid changes in the current.

Byron Allen Puts His Local TV Stations Up for Sale - The Hollywood Reporter

This one hit behind the barn.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

This device then solves the entire problem.

What do you think of Vance using a clip of an embarrassed teenager from almost 20 years ago in an attempt to bully Kamala Harris?

At one ohm, the resistor has a maximum of 1 watt power.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

There are two important concepts here.

Can you list every album you have ever listened to?

the problem then depends on "how fast does the fuse operate?".

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

An AC voltage/ current source, and an ac inductive load.

The Ray-Ban Meta smart glasses are on sale for their best price to date - The Verge

Can the fuse protect the electronic devices from lightning instead of a surge protector.

2024–10–10[John johnson John Johnson ]

The bolt then partially travels down the line to your home.

Why is going on a date today so much different than it was when I was young?

nine

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

He then asserts :

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

First Sentence:

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

A fuse is a non-resetable over current circuit protector.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

For this case there are devices called Metal oxide varistors (MOV).

He then describes the function of a fuse.

2024–10–16 [ OO OLAOYE OYEBODE ]

In schematic diagrams this is the symbol for a fuse:

[old diagram got deleted by accident]

The other is “what does a “fuse” do?”

One

The third is lightning and “how it gets conducted into a home.”

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

These are simplified answers to the original question, and does not change anything I wrote above.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

This is 'the assistant's answer'

It seems Mohan does not understand the difference between a comment and an Answer.

What does a fuse do?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Barnstars:

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

a photo is worth a thousand words.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

What is lightning?

Edit 2024–10.

At least they know the answer if they wanted it.

The MOV will conduct when the voltage exceeds 50% of line voltage.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Upvotes:

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

A circuit breaker is similar, but is resettable.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”